Riso ComColor 9150R Guide de dépannage télécharger pdf (Page 30)

2-8

ComColor Series Troubleshooting Guide 01

No paper is fed. / Multiple sheets of paper

are being fed. / The back of a card is turned

outward.

Paper feed settings do not match the paper properties (paper

thickness).

Configure the paper feed settings that match the paper properties using

the [Paper type] for the feed tray.

For details, see "Feed Tray" in the "User's Guide."

The paper feed pressure adjustment lever does not fit the paper

thickness.

Use the paper feed pressure adjustment lever to adjust the paper feed

pressure according to the loaded paper.

Set the lever to [ (NORMAL)] or [ (CARD)] according to the paper

type.

• Normally, set the lever to

[ (NORMAL)]. If paper feeding

is a problem, set this to

[ (CARD)].

For details on the paper feed

pressure adjustment lever and

paper type, see "Paper and

Originals" in the"Basic Guide".

Problem Possible Cause and Action to Take

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 57 58

Pas de commentaire

Riso ComColor 9150R Guide de dépannage Page 30